Can one change box and rule colours?
-
- Posts: 7
- Joined: Wed Jun 23, 2010 2:40 pm
Can one change box and rule colours?
Is there any way to change the box and rule colours when generating PDFs? I know how to change the other colours but there doesn't seem to be an option for these and I want a purely black-and-white PDF.
Peter Danckwerts
-
- Posts: 330
- Joined: Sun Oct 19, 2008 7:12 pm
- Location: Cornwall, England
-
- Posts: 7
- Joined: Wed Jun 23, 2010 2:40 pm
Thanks, I tried the Black and White (for Printing) option, but the frames still came out blue when I save a PDF. I tried creating a PDF using the print dialogue but I find it rather inconvenient as it splits the tree into many pages (many of which are blank) - and even then the boxes come out blue.
Peter Danckwerts
-
- Posts: 330
- Joined: Sun Oct 19, 2008 7:12 pm
- Location: Cornwall, England
Hi dankwerts,
Which diagram are you trying to print out?
I tried it on an Ancestors chart and did not get a 'blue box or frame'.
Save as PDF is the only way to get a single sheet unless you select a paper size that is bigger than the output - difficult to do with large trees unless you can use an A0 printer definition.
Nigel
Which diagram are you trying to print out?
I tried it on an Ancestors chart and did not get a 'blue box or frame'.
Save as PDF is the only way to get a single sheet unless you select a paper size that is bigger than the output - difficult to do with large trees unless you can use an A0 printer definition.
Nigel
-
- Posts: 7
- Joined: Wed Jun 23, 2010 2:40 pm
Descendant.NigelRichman wrote:Hi dankwerts,
Which diagram are you trying to print out?
I tried it on an Ancestors chart and did not get a 'blue box or frame'.
Save as PDF is the only way to get a single sheet unless you select a paper size that is bigger than the output - difficult to do with large trees unless you can use an A0 printer definition.
Nigel
Peter Danckwerts
-
- Posts: 330
- Joined: Sun Oct 19, 2008 7:12 pm
- Location: Cornwall, England
Hi,
Just tried that and the only Box I get is the Highlight for the 'Root' person.
The colour does not change with the Black option but can be set via the Custom settings panel - Change the highlight colour to a grey or remove altogether by selecting white.
Hope that is the box you mean.
Regards,
Nigel
Just tried that and the only Box I get is the Highlight for the 'Root' person.
The colour does not change with the Black option but can be set via the Custom settings panel - Change the highlight colour to a grey or remove altogether by selecting white.
Hope that is the box you mean.
Regards,
Nigel
-
- Posts: 7
- Joined: Wed Jun 23, 2010 2:40 pm
Thanks, but no, it's not what I mean. I already have the highlight set to white but I have blue boxes around each person (or couple) in both the preview and print-out. I don't particularly want them. See image of preview. PDFs some out like this, too.NigelRichman wrote:Hi,
Just tried that and the only Box I get is the Highlight for the 'Root' person.
The colour does not change with the Black option but can be set via the Custom settings panel - Change the highlight colour to a grey or remove altogether by selecting white.
Hope that is the box you mean.
Regards,
Nigel
[/img]
Peter Danckwerts
-
- Posts: 330
- Joined: Sun Oct 19, 2008 7:12 pm
- Location: Cornwall, England
-
- Posts: 7
- Joined: Wed Jun 23, 2010 2:40 pm